Company News

Current Position : Home/About US/ Company News

4043 filler rod 4043 filler rod

Features :4043 filler rod is usually used as ALSil, and is commonly used as filler material for argon arc welding and oxygen-acetylene gas welding of aluminum alloy workpieces and castings other than aluminum-magnesium alloys, especially for heat-tre

4047 aluminum filler rod 4047 aluminum filler rod

Features :Introduction of 4047 aluminum filler rod 4047 aluminum filler rod is an aluminum-silicon alloy welding wire with 11% silicon, with a melting point of 573-625C, good fluidity, strong thermal crack resistance, but insufficient ductility. Due t

aluminum welding rods aluminum welding rods

Features :Temperature definition of Aluminum welding rods The melting point of pure aluminum is 660.37 degrees Celsius, while the melting point of aluminum alloy is 482-660 degrees Celsius depending on the alloying elements it contains. When aluminum

flux coated aluminum brazing rods flux coated aluminum brazing rods

Features :Introduction of flux coated aluminum brazing rods flux coated aluminum brazing rods are made of carefully formulated filler metal rods/wires by coating a layer of firm flux on the surface of the aluminum rods. The attached flux has been care

aluminum brazing rods manufacturer aluminum brazing rods manufacturer

Features :aluminum brazing rods is a common solder, suitable for various brazing methods. It has excellent fluidity and corrosion resistance. Suitable for flame brazing, low melting temperature, easy to operate. The solder is brittle and has lower joi

aluminium clad fin strip aluminium clad fin strip

Features :Typical alloys of aluminium clad fin strip : 4343/3003/4343, 4343/3003/7072, 4343/3003/1100, 4343/3A11/4343, 4343/7A11/4343, 4343/7A11/7072, 4343/7A11/1100, 4343/6951/4343, 4004/ 3003/4004, 4004/3003/7072, 4004/3A11/4004, 4045/3003/4045, 404

aluminum clad fin aluminum clad fin

Features :Technical indicators of aluminum clad fin : Alloy composition: 3003, 3N03, 4343, 4045, 4004, 4N43, 4N45, 4N04 and other brands; Product thickness: (0.04~3) (0.01~0.03) mm; Product width: (10~150) (0.20~0.30) mm; Mechanical properties: tensil

Super thin Aluminum brazing foil Super thin Aluminum brazing foil

Features :The specification introduction of Super thin Aluminum brazing foil Alloy: 4047, 4045, 4004, 4104, 4343, etc. Temper: O, H14, H24, H16, H18 Thickness: 0.05mm--0.2mm Width: 8mm ---1400mm The production process of Super thin Aluminum brazing fo

ER5087 aluminum alloy welding wire rod ER5087 aluminum alloy welding wire rod

Features :Product introduction of ER5087 aluminum alloy welding wire rod : ER5087 aluminum alloy welding wire rod is aluminum-magnesium alloy welding wire, manganese, magnesium, chromium, zirconium alloy aluminum welding wire. Suitable for welding of

CONTACT US
CONTACT US
Looking Forward to Your Response!

Mobile:86 17344894490

Email:inquiry@signialuminium.com

Address:A126 Building 4, No.89 Science Avenue,National HI-Tech Industry Development Zone,Zhengzhou,Henan