Send Inquiry x
I can help you
Send

Aluminium HVAC Fin Stock

Current Position :HOME/Fin Stock/Aluminium HVAC Fin Stock

Aluminium HVAC  Fin Stock

    Signi Aluminium is known as one of the world's top suppliers of high-quality fin stock for use in a wide variety of Heating, Ventilation and Air Conditioning (HVAC), and other heat transfer applications.  Our fin stock is known for maintaining formability while offering remarkable strength and toughness.  We have the capability to develop fin stock solutions to meet even the most demanding expectations, and we can work hand-in-hand with you to create a product that fits your specific needs.

Specs of Aluminium Fin Stock


  Specs(mm) Tolerance(mm) Remark
Thickness 0.105/0.115 +0-0.004  
Thickness 0.095, 0.125 ±0.003  
Width 355,390,405,465,470,540,695,
925,1066,416,490,902,1070
±1.0  
Surface Roughness 0.3--0.5um ±2  
Inner Diameter 152    
Outer Diameter 800--1100 (Suitable for: 540mm, 695mm, 902mm,
 925mm,1066mm, 1070mm)
Coil weight less
 than 2 tonne
700--1000 (Suitable for: 355mm,390mm,
405mm,465mm,470mm)
Coil weight less
 than 2 tonne

Alloy   Temper Tension 
Strength(MPa)
Elongation(%) Thickness 
tolerance
Width 
Tolerance
Cupping  Value 
8011 H22 110-120 ≥20% ±3% ±1mm ≥6
8011 H24 120-130 ≥18% ±3% ±1mm ≥6
3102 H26 130-140 ≥15% ±3% ±1mm ≥5.5
 
Normal Hydrophilic Aluminium foil (Blue)
 
Coated Laquer Single Side 
Film Thickness
Hydrophilic Film Thickness
 of Single Side
Anticorrosive Coating
 
Hydrophilic 
Angle
 Alkali 
Resistance
Hui Gu 0.8-1.4um 0.14-0.27um 0.66-1.13um ≤10° 10%nNaOH 
20minutes 
at 25℃


High Corrosion of Hydrophilic Aluminium foil( Golden): 
 
Coated Laquer Single Side Film
 Thickness
Hydrophilic Film 
Thickness of Single Side
Anticorrosive Coating
 
Hydrophilic
 Angle
 Alkali Resistance
Hui Gu 1.27-1.86um 0.14-0.27um 1.13-1.59um ≤10° 10%nNaOH 20minutes at 25℃




DELIVERY TECH-SPECIFICATION
 
PRODUCT NAME : ALUMINIUM FIN STOCK (BARE AND HYDROPHILIC) 

 
1. HYDROPHILIC PRE-COATED Aluminium FIN STOCK
 
2. BARE Aluminium FIN STOCK
 
3. APPLICATION RANGE
 
THIS SPECIFICATION APPLIES FOR HEAT-EXCHANGERS Al FIN STOCK OF AIR CONDITIONERS.

4. CHEMICAL COMPOSITION



Alloy Si Fe Cu Mn Mg Cr Zn Ti Others Al
Tag No.                 Per Total  
8011 0.50  0.9 0.6  1.0 0.10 0.20 0.05 0.05 0.10 0.08 0.05 0.15 Balance
Remarks in the table, if there is upper and lower limit of the content, it is alloy element if the content is a single value, Aluminium will be minimum limit other impurity element will be maximum limit.

5. MECHANICAL   PERFORMANCE    
ALLOY
NO
TEMPER
THICKNESS
TENSILE
STRENGTH
(Mpa)
ELONGATION
(%)
ERICHSEN
(mm)
8011 O 0.095-0.130 85-105 ≥18 ≥6.0
8011 O 0.130-0.160 85-105 ≥19 ≥6.5
8011 O 0.160-0.200 85-105 ≥20 ≥6.8
8011 H22 0.100-0.130 100-130 ≥17 ≥6.0
8011 H22 0.130-0.160 100-130 ≥18 ≥6.2
8011 H22 0.160-0.200 100-130 ≥19 ≥6.5
8011 H24 0.100-0.130 115-140 ≥15 ≥5.5
8011 H24 0.130-0.160 115-140 ≥16 ≥6.0
TESTING  METHODS  GB/T228-2002  YS/T419-2000  
 

6.  COATING  PERFORMANCE

6.1 COATING STRUCTURE


HYDROPHILIC LAYER
ANTI-CORROSIVE LAYER
BASE MATERIAL
ANTI-CORROSIVE LAYER
HYDROPHILIC LAYER
 
6.2  COATING TYPES

(1) FILM WITH CORROSIVE RESISTANCE ORGANIC RESIN
 
(2) HYDROPHILIC FILM ORGANIC RESIN

6.3 COATING PERFORMANCE


SERIAL NO ITEMS TESTING METHODS RESULTS
1 SUPERFICIES AND
APPEARANCE
BY EYES GOLDEN, BLUE
BLACK
2 FILM THICKNESS CALCULATED FROM
WEIGHT OF FILM
2—3µm
3 ORIGINAL
HYDROPHILIDICY
TEST HYDROPHILICITY DIRECTLY ≥8mm
4 INITIAL
HYDROPHILICITY
DIP IN VAPORING OIL 3min (20±15)→VERTICAL
SITUATION 7min AT NORMAL TEMPERATURE→
210±10 DRY 2min →DIP IN PURE WATER 10min
→DRY 10min/CYCLE AT NORMAL TEMPERATURE, 
10CIRCLE→TEST HYDROPHILICITY.
≥6.0mm
5 SALT-SPRAYB RESISTANCE
JIS-Z-2371 (5%×35×72) JIS-Z-2371 (5%×35×72HOURS)
CONTINUOUS SALT SPRAY
≥R.NO9.5
6 HEAT RESISTANCE
A : 200  ×10MINS
B : 400  ×10MINS
A : NO CHANGES
B : TURNS LIGHT BROWN
7 OIL RESISTANCE DIP IN PRESS OIL 24HOURS→WASH IN FLOWING WATER→PEELTEST NO DELAMENATION
8 ADHEWSIVE FORCE
A. BENDING 180°
B. PEEL TEST
C. ERICHSEN VALUE=5MM
100% NO DELAMINATION
9 ODOR BY NOSE AFTER DIPPING IN WATER AND DRYING NATURALLY NO ODOR
7. 
7.1 SIZE AND TOLERANCE


THICKNESS WIDTH
SIZE TOLERANCE SIZE TOLERANCE
0.095-0.20 ±5% 150-1400 ±1

7.2 outer diameter of tube core and correspondence roll

UNIT : mm

Tube core material : Aluminium or steel 
Tube core inner diameter :  150, 152.4 , 200
correspondingφ150  φ152.4  φ200tube core,
roll maximum outer diameter : 
1200

8. SUPERFICIES AND APPEARANCE
 
1. CLEAN NO FISH TAILS FOLDING SCRATCH AND OTHER DEFAULTS.
2. NO ADHENSIVE THINGS ON THE SURFACE NO COLOR CHANGES.
3. FLAT SIDES SHOULD BE SMOOTH AND NO CRACKS ON SIDES.
4. NO APPARENT DIFFERENCE OF COLOR BETWEEN COILS OR BETWEEN LAYERS OF EACH COIL.


9. DEMANDS OF PACKAGE AND OTHERS
 
STANDARD EXPORTING PACKAGE USING FUMIGATED WOODEN PALLET.

10. STORAGE CONDITIONS WARE HOUSE FOR LONG-TIME STORAGE SHOULD MEET THE REQUIREMENTS AS IT FOLLOWS
 
1. CLEAN DRY HUMIDITY ≤65% NO CORROSIVE GAS.
2. ABLE TO PREVENT RAIN SNOW AND WATER FROM PERMEANCE.
3. NO OTHER CHEMICAL ACTIVE MATERIALS OR HUMID MATERIALS.

11. TAB THE TAB OF EACH COIL SHOULD INCLUDE THE CONTENTS AS IT FOLLOWS
 
1. PRODUCT NAME
2. ALLOY & TEMPER
3. PRODUCT SPECIFICATION
4. LOT NO
5. NET WEIGHT
6. PACKAGING DATE


12. QUALITY CERTIFICATE FOLLOWING CONTENTS SHOULD BE INDICATED IN QUALITY CERTIFICATE.
 
1. PRODUCT  NAME
2. ALLOY & TEMPER
3. SPECIFICATION
4. TENSILE  STRENGTH
5. ELONGATION
6. ERICHSEN
7. QUALITY OF COATING APPEARANCE AND PERFORMANCE 
8. LOT NO
9. NET WEIGHT

13. OTHERS THE ITEMS INCLUDED IN THE SPECIFICATION SHOULD BE OBSERVED BY TWO PARTIES ANY PROBLEM SHOULD BE SETTED BY NEGOTIATION.

 
14. PACKING








CONTACT US
Contact
联系我们
Looking Forward to Your Response!

Tel:037155689814

Phone:086-13673369503

Fax:+86-371-55686475

Mobile:13673369503

Skype:Signialuminium

Email:frank@signialuminium.com

Address:A126 Building 4, No.89 Science Avenue,National HI-Tech Industry Development Zone,Zhengzhou,Henan

[UP]