3003 Aluminum Alloy Fin Stock
Author: Time:2023-05-17
Alloy: 3003Temper: O, H22, H24, H26
3003 aluminum alloy fin stock is most powerful alloy for anti-corrosion of air conditioner, 3003 is highly resistant to weathering, even in industrial atmospheres that offer corrode other metals. It is also corrosion resistant to many acids. 3003 have better anti-corrosion performance than other fin stock alloys.
3003 Aluminum Foil Fin Stock application:
For air conditioner, refrigerator condenser and evaporator fins production coated aluminum foil/ fin stock is mainly used for the fins production of heat exchanger, such as air conditioner condenser & evaporator, no frost evaporator/fin type evaporator of refrigerator, commercial refrigerator condenser & evaporator, car air conditioner condenser & evaporator etc.
| Alloy Temper | 1100 | 1200 | 8011 | 3102 | 1100 | 3003 | 1300 | ||
|---|---|---|---|---|---|---|---|---|---|
|
Chemical Composition (%) |
Cr | <0.05 | Si+Fe: 0.95 |
Si: 0.6 Fe: 0.7 |
|||||
| Zn | <0.10 | <0.10 | <0.10 | 0.1 | Cu: 0.05--0.2mm | Cu: 0.05--0.20 | 0.1 | ||
| Ti | <0.05 | <0.08 | 0.06 | Mn: 0.05 | Mn: 1.0--1.5 | 0.1 | |||
| Mg | 0.05 | <0.05 | <0.05 | Zn:0.1 | --- | 0.05 | |||
| Other | Single | <0.05 | 0.05 | <0.05 | |||||
| Total | <0.15 | <0.15 | <0.15 | 0.15 | <0.15 | <0.15 | <0.15 | ||
| Al | ≥99.0 | ≥99.0 | Remainder | ≥99.0 | ≥99.0 | Remainder | ≥99.0 | ||
Specs of 3003 aluminum alloy fin stock
| Specs(mm) | Tolerance(mm) | Remark | |
|---|---|---|---|
| Thickness | 0.105/0.115 | +0-0.004 | |
| Thickness | 0.095, 0.125 | ±0.003 | |
| Width |
355,390,405,465, 470,540,695,925, 1066,416,490,902, 1070 |
±1.0 | |
| Surface Roughness | 0.3--0.5um | ±2 | |
| Inner Diameter | 152 | ||
| Outer Diameter | 800--1100 |
(Suitable for: 540mm, 695mm, 902mm, 925mm,1066mm, 1070mm) |
Coil weight less than 2 tonne |
| 700--1000 |
(Suitable for: 355mm,390mm, 405mm,465mm,470mm) |
Coil weight less than 2 tonne |
| Alloy | Temper |
Tension Strength (MPa) |
Elongation(%) | Thickness tolerance | Width Tolerance | Cupping Value |
|---|---|---|---|---|---|---|
| 8011 | H22 | 110-120 | ≥20％ | ±3％ | ±1mm | ≥6 |
| 8011 | H24 | 120-130 | ≥18％ | ±3％ | ±1mm | ≥6 |
| 1100 | O | 75-105 | ≥15％ | ±3％ | ±1mm | ≥6 |
| 3102 | H26 | 130-140 | ≥15％ | ±3％ | ±1mm | ≥5.5 |
| 3003 | O | 95-140 | ≥15％ | ±3％ | ±1mm | ≥6 |
Normal Hydrophilic aluminum foil (Blue)
| Coated Laquer |
Single Side Film Thickness |
Hydrophilic Film Thickness of Single Side |
Anticorrosive Coating |
Hydrophilic Angle |
Alkali Resistance |
|---|---|---|---|---|---|
| Hui Gu | 0.8-1.4ｕm | 0.14-0.27ｕm | 0.66-1.13ｕm | ≤10° |
10％nNaOH 20minutes at 25℃ |
High Corrosion of Hydrophilic aluminum foil( Golden) :
| Coated Laquer |
Single Side Film Thickness |
Hydrophilic Film Thickness of Single Side |
Anticorrosive Coating |
Hydrophilic Angle |
Alkali Resistance |
|---|---|---|---|---|---|
| Hui Gu | 1.27-1.86ｕm | 0.14-0.27ｕm | 1.13-1.59ｕm | ≤10° |
10％nNaOH 20minutes at 25℃ |
